Generator Installation in Hickory, NC

Don't let a storm decide when your power comes back on. I'm Anthony Stickler, owner and licensed electrician, and I install two kinds of backup power for homes across the Catawba Valley: whole-home standby generators that start on their own, and portable generator setups with an inlet and interlock kit that let you power your house safely from a generator you roll out. Every install is turnkey, with the permit and inspection included.

Two Briggs & Stratton PowerProtect whole-home standby generators against a stormy sky

Which Generator Setup Is Right for You?

  • Whole-home standby generator. Permanently installed and fueled by natural gas or propane. When the power drops, it starts on its own and switches your home over automatically, whether you're home or not. I install Briggs & Stratton whole-home systems.
  • Portable generator with an inlet and interlock kit. You wheel the generator out, plug it into an inlet on the outside of your house, and the interlock lets you safely run the circuits you choose from your panel. It costs far less than a whole-home system. I'm a certified installer and reseller of DuroMax generators, or I can hook up a generator you already own.

How I Size and Quote Your Generator

  1. I come look at your panel or panels. Your electrical setup decides a lot about what will work.
  2. I pick the spot. Where the generator or the inlet will go.
  3. I ask the questions that matter. Do you already own a generator, and what size? If not, do you want me to quote one? What do you want running on backup power? What fuel do you want to use?
  4. I size the generator and give you pricing. Based on what you actually need to run, not the biggest unit on the lot.
  5. Turnkey install. I pull the permit, do the electrical, quote and handle the gas piping when it's needed, and get it inspected.

What Generator Installation Costs in Hickory

  • Portable generator package: around $5,000 for a standard 13,000-watt DuroMax generator with a generator inlet and interlock kit installed, gas piping not included. A different model can raise the price.
  • Whole-home standby generator: quoted on site. It depends on the generator size, natural gas or propane, how much of the house you want backed up, and the distance to the fuel line and panel.
  • Gas piping: quoted with the job, so you get one turnkey price.

Every price includes the permit and inspection. Financing is available.

Financing Available

Prefer to pay over time? Financing is available through Synchrony, subject to credit approval. See if you prequalify or learn more on my financing page. Financing is provided by Synchrony Bank, not by Stickler's Electrical Service.

Questions to Settle Before You Buy

  • Fuel: does your home already have natural gas or propane, or do you need a fuel source?
  • Loads: do you want the whole house running, or just the essentials like the refrigerator, well pump, furnace or AC?
  • Switching: do you want it to start and switch over automatically, or are you okay rolling out a generator and plugging it in?

What Customers Say

"My husband and I were so pleased with Anthony Stickler's service that we hired him again to install a whole home generator. He and his crew were all excellent. Anthony is a true professional and really knows what he is doing. He was punctual, tidy and very helpful and pleasant… He is a fair and honest businessman." — Elizabeth Y., Granite Falls, NC · Whole-home generator ★★★★★

Generator Questions

What size generator do I need?

It depends on what you want running during an outage. I look at your panel and ask what matters most to you, like the well pump, refrigerator, heat or AC, then size the generator to fit. A standard portable setup uses a 13,000-watt generator.

Can you hook up a generator I already own?

Yes. I can install a generator inlet and interlock kit for a generator you already have, as long as it's a good fit for what you want to run. See my generator interlock installation page for pricing and what's included.

What is a generator interlock?

It's a device on your panel that keeps the main breaker and the generator breaker from being on at the same time. That keeps generator power from feeding back onto the utility lines, which is dangerous for you and for line workers.

Natural gas or propane?

Whole-home standby generators run on either. If you already have natural gas, that's usually the simplest. If not, propane works well. you'll get a rundown of the options for your home.

Do you handle the gas piping?

Yes, I quote the gas piping with the job and handle it as part of a turnkey install, so you're not coordinating extra contractors.

Do generator installs need a permit?

Yes. I pull the permit and schedule the inspection on every generator install, and it's included in the price.

What brands do you install?

Briggs & Stratton for whole-home standby systems, and DuroMax for portable setups. I'm a certified DuroMax installer and reseller.

Get a Generator Quote

Call (828) 610-1894 or send me a message. Serving Hickory, Granite Falls, Morganton, Lenoir, Conover, Newton and the rest of the Catawba Valley.

Related: generator maintenance · panel replacement and service upgrades · surge protection · Home Protection Plan