Electrical Repair in Hickory, NC

Something stopped working, keeps tripping, or doesn't feel right. Stickler's Electrical Service handles electrical repair for homeowners in Hickory, NC and across the Catawba Valley. My team finds the real cause, tells you what it will cost before work starts, and fixes it right.

The calls I get most are a room or part of the house with no power, outlets that stopped working, flickering lights, and adding outlets where you need them.

Power Out in a Room? It's Usually Not the Outlet You Think

When part of a room loses power, the most common cause I find is a backstabbed receptacle. That's an outlet wired by pushing the wire into a hole in the back instead of wrapping it around the screw terminal. Over time, those connections loosen, heat up and fail.

Here's the part that surprises people: the problem usually isn't in the outlet that stopped working. It's in one of the outlets that still works. Power runs from one outlet to the next, and when a connection fails partway down the line, everything past it goes dead.

I've had customers get frustrated with me because I start opening up outlets that are working fine. Then I show them the loose or burned connection inside one of those working outlets, and it makes sense. Nine times out of ten, that's exactly where the problem is.

Other times the problem is in a light fixture, where the connections have come loose or burned up. A common cause is incandescent bulbs with a higher wattage than the fixture was built for. The extra heat cooks the wiring inside the fixture.

Flickering Lights

Flickering can be as simple as an LED bulb on an older dimmer, or as serious as a loose connection in a fixture, switch, outlet or panel. A loose connection heats up every time current flows through it, so it's worth finding before it gets worse. If the flicker is on a dimmer, see my lighting page for how that gets fixed.

Electrical Problems My Team Repairs

  • A room or part of the house with no power
  • Outlets or switches that have stopped working
  • Flickering or dimming lights
  • Breakers that keep tripping or won't reset (see circuit breaker repair)
  • Warm, discolored or scorched outlets and switches
  • GFCI outlets that won't reset
  • Light fixtures with loose or burned connections
  • Buzzing, crackling or humming from outlets or the panel
  • Damaged or outdated wiring (see circuits and wiring)
  • Storm and power surge damage (see surge protection)

Need more outlets? Adding outlets where you actually use power is one of the most common jobs we do. See circuits and wiring or lighting, switches and outlets.

What a Repair Visit Costs

Every situation is different, so call and we'll talk through what's going on and what the visit involves. Once the cause is found, you get the price for the repair before any work starts. No surprises when the bill shows up.

On a Home Protection Plan, the diagnostic fee is waived and you get 10% or 15% off labor and materials.

When It's an Emergency

Some problems shouldn't wait. If you see sparks, smell burning, find a scorched outlet or panel, or have water near electrical equipment, turn off the main breaker if it's safe to reach and call right away. Emergency service is available 24/7. If there's a fire, call 911 first.

How a Repair Works

  1. Diagnose first. The cause gets found before anything is replaced, so you don't pay for parts you don't need.
  2. Explain it plainly. You're shown what's wrong and given the price before work starts.
  3. Fix it right. Every repair is done to North Carolina code, with permits where they're required.

When a Repair Isn't Enough

Sometimes a repeating problem points to something bigger, like an aging panel. If your panel is the cause, you'll hear that honestly, along with your options. See electrical panel replacement and panel upgrade costs in Hickory.

Electrical Repair Questions

Why are you opening outlets that still work?

Because that's usually where the problem is. Power runs from outlet to outlet, and a failed connection in a working outlet can kill everything after it. Nine times out of ten, the bad connection is in one of the outlets that still works.

Can bigger light bulbs damage a fixture?

Yes. Incandescent bulbs above the fixture's wattage rating put out extra heat that can loosen or burn the connections inside. Check the label in the fixture for its maximum wattage.

What does a repair visit cost?

Call (828) 610-1894 and we'll go over it on the phone. You always get the repair price before any work starts, and Home Protection members have the diagnostic fee waived.

Do you handle electrical emergencies?

Yes. Emergency service is available 24/7. Call (828) 610-1894.

Should I keep resetting a breaker that trips?

No. A breaker that trips again after you reset it is telling you something is wrong. Leave it off and call. See circuit breaker repair.

Electrical Repair Near You

I serve Hickory, Conover, Newton, Maiden, Granite Falls, Lenoir, Morganton, and communities across the Catawba Valley. See all service areas.

Call (828) 610-1894 or send me a message.